Latest update 5.0.7 Broke lot of sound

foxit
Posts: 13
Joined: 25 Aug 2020, 17:49

Latest update 5.0.7 Broke lot of sound

Post by foxit » 25 Aug 2020, 17:57

Hi
Latest update 5.0.7.
Broke sound of lot of different channels.
Only sound heard is white noise.
Reverted back to "stable" 4.2.33. changed from beta to stable.
Sound is ok, on the affected channels.
Please fix if possible.

/SK

ftor
Posts: 995
Joined: 12 May 2020, 09:22

Re: Latest update 5.0.7 Broke lot of sound

Post by ftor » 25 Aug 2020, 19:10

Please share link for this streams


ftor
Posts: 995
Joined: 12 May 2020, 09:22

Re: Latest update 5.0.7 Broke lot of sound

Post by ftor » 26 Aug 2020, 10:11

Can't play this stream, ask your SP to contact with support.

harlock
Posts: 32
Joined: 14 Jun 2020, 22:56

Re: Latest update 5.0.7 Broke lot of sound

Post by harlock » 27 Aug 2020, 16:08

same for me lots of white noise in the audio

ftor
Posts: 995
Joined: 12 May 2020, 09:22

Re: Latest update 5.0.7 Broke lot of sound

Post by ftor » 27 Aug 2020, 17:15

Can you make a photo of screen with affected channel and with s.info+del

foxit
Posts: 13
Joined: 25 Aug 2020, 17:49

Re: Latest update 5.0.7 Broke lot of sound

Post by foxit » 28 Aug 2020, 09:41

Can not paste a picture into this form.
In the firmware 5.0.7 . In the Audio frames dec: 2272, drop:14 (example). It counts under the audio frames. White noise only..
While the firmware 4.2.33. It does not count under the Audio frames . Stays put on Audio frames dec: 0, drop:0 . And the sound comes out correct.

Cy67
Posts: 30
Joined: 28 Aug 2019, 00:21

Re: Latest update 5.0.7 Broke lot of sound

Post by Cy67 » 29 Aug 2020, 10:38

Try to upload pictures here https://postimages.org/

Sopor
Posts: 78
Joined: 08 Mar 2019, 03:02

Re: Latest update 5.0.7 Broke lot of sound

Post by Sopor » 29 Aug 2020, 22:05

It seems to be a similar issue as the one i already have posted here viewtopic.php?f=6&t=1487 at least for me.

When there will be some minor glitches in the picture/audio it suddenly will be white noise and i have to change channel and back again. Only a small amount of channels have static white noise. In earlier firmwares the sound got quiet when there was glitches in picture/audio, but with this 5.0.7 it will continue with white noise. It will not restart the box as it do with DTS audio, but it is still very annoying and much louder sound than normal sound.

Tell use what information you need instead @ftor so we can give it to you.

Kingcool
Posts: 18
Joined: 02 Sep 2018, 09:08

Re: Latest update 5.0.7 Broke lot of sound

Post by Kingcool » 29 Aug 2020, 23:14

foxit wrote:
26 Aug 2020, 09:25
http://iptvworld.nl:2095/kK79tWEkKy/8iUYzZanfG/10972
white noise only
Pretty dumb to post portal, username and pass to a service? I hope they have blocked that line.

Post Reply